Mon–Sat 8a–10p (586) 284-3810 Free Estimate
Clean, re-sand, seal — like the day they were laid

Your Pavers Don't Need Replacing. They Need Rescuing.

Weeds in the joints, faces gone green, colors flattened under years of grime: restoration takes on each of them, and sunken or shifted sections are fixed first through our paver repair service. Full paver restoration costs a fraction of replacement and looks nearly identical to a brand-new install.

★★★★★ 4.9 stars from 177 Google reviews

The Three-Stage Rescue for Weathered Paver Surfaces

The pavers themselves are durable. The sand between them wears out first. As joint sand washes out, weeds move in, edges shift, and the surface starts reading as "old." Add algae film and UV-flattened color, and homeowners start pricing replacement for a surface that's structurally fine.

Restoration attacks each failure directly. Stage one is a deep professional cleaning that strips algae, grime, and embedded stains from the paver faces and clears the failing sand out of the joints with a wide, low-angle spray. Stage two re-sands the surface with polymeric sand, joint sand with a binder that stiffens once it is watered, so the joints resist washout and leave weeds and ants less room. The binder adds no structural strength, which is why sunken or loose pavers are repaired first. Stage three applies a professional sealer that revives the pavers' color depth and helps the surface resist stains and fading.

The finished surface doesn't look cleaned. It looks installed last week — for a fraction of what replacement would run.

MPWS technician in a branded blue shirt power washing a paver patio beside a gray deck by the water
From one of our job sites

Drag the Handle. Same Property, Same Angle.

Shot by the crew that did the work: one frame before we started, one after the job was done.

A brick paver walkway dulled by weed growth, sand loss and surface algae
The same walkway after MPWS cleaning, re-sanding and sealing
After Before
The restoration process

Three Stages, One Restored Surface

Deep Clean

Commercial surface cleaning strips organic growth and grime from paver faces and clears failed sand from the joints with a wide, low-angle spray, the clean start everything else builds on.

Polymeric Re-Sand

Joints cleared to at least 1½ inches are refilled with polymeric sand, compacted, and watered so the binder stiffens the joint, resists washout and cuts down on weeds and ants.

Seal & Protect

Professional sealer deepens color, adds your choice of natural or enhanced finish, and helps the surface resist stains and UV fade.

Where it applies

Patios, Walkways, Driveways — and the Pool Deck Too

Any interlocking paver surface qualifies: backyard patios that have hosted a decade of summers, front walkways that set your home's first impression, paver driveways carrying real vehicle load, and pool surrounds where joint sand loss becomes a barefoot hazard.

Wet herringbone pavers during paver cleaning, washed red pavers above and green-stained pavers below
The clean line runs across a herringbone patio: washed pavers above, pavers still filmed with growth below.

During your estimate we'll assess the base as well. Sunken, heaved or shifted sections are fixed first through our paver repair service, so the cleaning, sand and sealer go down over a sound surface.

No phone number required

What Will Paver Restoration Cost at My House?

Pick your home size and condition for a real range in about twenty seconds. Add other services to see the bundled price — one visit is always cheaper than three.

1 · What do you need?

2 · Home size

3 · Condition

Questions, answered

Paver Restoration FAQs

How much does paver restoration cost versus replacement?

Paver restoration starts at $399 for a full clean, re-sand, and seal, well below what demolition and new installation would cost, with visually comparable results. Your estimate itemizes each stage so you can see exactly where the value sits.

What is polymeric sand and why does it matter?

It's joint sand blended with a binder that stiffens after it is watered. Compared with plain sand, it resists washout from rain, runoff and cleaning, and it cuts down on weeds and ants without ending them. It adds no structural strength, so it can't make up for a failed base, and it goes into joints cleared to at least 1½ inches, never over old sand.

How long does the restored surface last?

No polymeric sand maker we've checked gives the joints a fixed lifespan, so we don't promise one: runoff, downspouts, shade and how the surface is cleaned all decide it. The sealer is renewed every three to five years to keep the color and stain protection up, and a look at the joints each spring shows when they need attention.

Can you fix sunken or shifted pavers?

Yes. Our paver repair service lifts sunken or heaved pavers, corrects the base underneath and resets them, replaces cracked or broken pavers, and resets shifted edges and failed edge restraints. Repairs are quoted on their own, from photos or in person, and they come first, so a restoration never seals over a problem. If tree roots or a drainage problem is behind the movement, we'll tell you during your estimate, since that work is outside what we do.

Straight from Google

What Neighbors Say After We've Done This Work

Live from our Google Business Profile — 4.9 stars across 177+ reviews, nothing filtered out.

Guides

Questions about paver restoration, answered

All guides →

Brick Paver Restoration across Macomb, Oakland & St. Clair Counties

We bring paver restoration to all 87 communities we serve — zero travel fees in all three counties. Find your city below for local details, or call and we'll confirm your address on the spot.

Restore the Patio. Skip the Demolition.

Free paver restoration estimates with stage-by-stage pricing. See what installation day looks like the second time around.

Get My Free Estimate or call (586) 284-3810 — Mon–⁠Sat, 8am–⁠10pm