Sealed Concrete Survives Michigan. Bare Concrete Just Endures It.
Every winter, unsealed concrete absorbs water, freezes, and flakes apart a little more. Professional sealing locks the surface against water, salt, and stains — and decorative staining can make it beautiful while we're at it.
The Upgrade Michigan Concrete Is Begging For
Concrete's worst enemy isn't traffic — it's water. Every unsealed surface in Macomb County spends the winter absorbing moisture that freezes, expands, and pops tiny flakes off the surface (that's the "spalling" you see on neglected driveways). Add road salt, which accelerates the chemistry, and bare concrete in this climate is in a slow-motion fight it can't win.
Sealing changes the outcome entirely. A professionally applied penetrating or film-forming sealer closes the pores that water exploits, causes oil and grime to bead on the surface instead of soaking in, and deepens the concrete's color to a clean, finished look. On stamped concrete, sealing is what keeps the pattern crisp and the color rich — unsealed stamp work fades measurably every single year.
Want more than protection? Our decorative staining turns plain gray slabs into finished surfaces with real design presence — from subtle earth tones to rich, variegated effects that read like natural stone. Patios, porches, and pool decks are the usual candidates, and the results change how the backyard feels.
Drag the Handle. Same Property, Same Angle.
Shot by the crew that did the work: one frame before we started, one after the job was done.
Choose Your Level of Finish
Penetrating Sealer
Invisible protection that soaks into the concrete and blocks water and salt from within. A natural, low-sheen finish suited to driveways and walks.
Decorative Sealer
Enhances color with a satin or wet-look finish while defending against stains and freeze-thaw. The standard choice for stamped and exposed-aggregate surfaces.
Full Staining
Complete color change with professional-grade stains, finished under protective sealer. Plain concrete in, designer surface out.
Why Our Seal Jobs Last
Sealer is only as good as the surface under it. Applied over dirt, algae, or old failing sealer, even top-grade products bubble, cloud, and peel within a season — which is exactly what happens with a rushed application.
Every MPWS sealing project starts with full professional cleaning and complete drying time, followed by application at the correct temperature, coverage rate, and cure window. It's slower. It's also what gives the sealer its best chance to last.
A Bad Seal Job Costs More to Undo Than to Do
Sealer is unforgiving. Rolled over concrete that is still damp, laid on too thick, applied in the wrong weather or on top of an incompatible product, it can cloud white, bubble, peel or go slick, and another coat does not fix any of it.
Undoing it is the messy, expensive part. A cloudy solvent-based acrylic may have to be re-opened with xylene. A failed film usually has to come off with a stripper matched to its chemistry, often in more than one pass, with the slurry collected rather than washed toward a drain. Layered or stubborn coatings can need grinding or sandblasting, which takes a little of the surface with it and can change the texture of stamped or decorative work. All of that happens before new sealer can go down, so a redo often costs more than the original job. Our guide to fixing cloudy or peeling sealer walks through each repair.
That is why the company you hire matters more than the product on the label. Before anyone seals your concrete, ask which product they will use, how they confirm the slab is dry, how they identify what is already on it, and how long they will keep you off it afterward. Ours is 48 hours before foot traffic and 72 hours before vehicles, longer if the label or cold, damp weather calls for it.
The Products and Brands We Use
We work with established decorative-concrete and construction-chemical makers, and choose the product for the surface, its age and what is already on it. Each logo links to the maker's own site.
Brickform
A Solomon Colors brand, founded in 1971, that makes decorative concrete products including sealers, color hardeners, release agents and stamps.
brickform.com ↗
Solomon Colors
A family- and employee-owned Springfield, Illinois company, with roots going back to 1927, that makes pigments for colored concrete and mortar.
solomoncolors.com ↗
Smith Paint Products
A family-owned Harrisburg, Pennsylvania manufacturer, making coatings since 1929, whose Smith's line includes decorative concrete stains and sealers.
smithpaints.com ↗
ChemMasters
A Madison, Ohio maker of concrete chemicals, including cures and sealers, coatings and cementitious products for residential and commercial work.
chemmasters.net ↗
What Will Staining & Sealing Cost at My House?
Pick your home size and condition for a real range in about twenty seconds. Add other services to see the bundled price — one visit is always cheaper than three.
1 · What do you need?
2 · Home size
3 · Condition
Staining & Sealing FAQs
How often does concrete need resealing?
Every three to five years for most Michigan surfaces, depending on traffic, sun exposure, and salt load. Driveways on the salt-heavy end of that range, covered patios on the long end. A quick water-bead test tells the story — if water soaks in flat instead of beading, it's time.
When can we walk and drive on it?
Feet and patio furniture stay off for 48 hours after we seal, and vehicles for 72 hours, longer when the product label or cold, damp weather asks for it. We schedule around your needs and confirm those cure times with your quote — no guessing with your car in the driveway.
Can you seal brand-new concrete?
Yes — after it finishes curing, which takes about 28 days from pour. Sealing new concrete at the right moment is the single best thing you can do for its lifespan, locking in that day-one look before the first winter ever touches it.
What does staining look like compared to paint?
Nothing like paint — and that's the point. Stains penetrate and react with the concrete itself, producing translucent, variegated color with natural depth that can't chip or peel the way coatings do. We'll show you finish samples during your estimate so you're choosing from real results, not a brochure.
What Neighbors Say After We've Done This Work
Live from our Google Business Profile — 4.9 stars across 177+ reviews, nothing filtered out.
Questions about staining & sealing, answered
Why does my new concrete sealer have bubbles, dark blotches or roller marks?
Bubbles in fresh sealer usually mean the coat went on too heavily or onto a hot slab in direct sun, so it skinned over and trapped solvent. Dark…
Read the guide → Concrete & HardscapeHow long does concrete sealer need to dry before it rains?
Plan on at least 12 hours with no rain, dew or sprinkler water after sealing concrete, the American Society of Concrete Contractors' rule, and 24…
Read the guide → Concrete & HardscapeHow do I tell what kind of sealer is already on my concrete before I reseal it?
To tell what sealer is on your concrete, test a clean, dry corner. Water beading on a glossy surface points to a film, and beading with no sheen…
Read the guide → Seasonal & CommercialWhat ice melt is safe for concrete, stamped concrete and pavers?
Rock salt (sodium chloride) is the least damaging common ice melt for concrete and concrete pavers, according to the Concrete Masonry and Hardscapes…
Read the guide → Concrete & HardscapeShould I use a water-based or solvent-based sealer on my concrete patio or pavers?
Choose solvent-based sealer if you want the darker wet look on stamped concrete or pavers and accept a strong odor, high VOCs and flammable fumes…
Read the guide → Concrete & HardscapeHow Much Does Concrete Sealing Cost in Macomb County?
Concrete sealing in Macomb County generally starts around $299 and brick paver restoration around $399, with the final number driven by square…
Read the guide →Services that pair well with staining & sealing
Concrete Cleaning
Surface-cleaner technology and hot water restore concrete to its original color — no zebra stripes, no etching, no missed edges.
Explore Concrete Cleaning →Brick Paver Restoration
Don't replace your pavers — restore them. Deep cleaning, polymeric re-sanding, and sealing bring weathered patios and walkways back to installation day.
Explore Paver Restoration →Power Washing
Commercial-grade pressure washing that strips years of grime off concrete, brick, and stone — the flagship service that built our name.
Explore Power Washing →Concrete Staining & Sealing across Macomb, Oakland & St. Clair Counties
We bring staining & sealing to all 87 communities we serve — zero travel fees in all three counties. Find your city below for local details, or call and we'll confirm your address on the spot.
Macomb County & the Pointes
Oakland County
Troy & the Northeast
Woodward Corridor & South Oakland
Bloomfield & the Lake Belt
West Oakland & the Lakes Area
The Rural North
St. Clair County
Port Huron & the Blue Water Area
The St. Clair River Towns
Inland & Anchor Bay Side
Seal the Concrete You Have Before Winter Makes You Replace It
Free staining and sealing estimates, with guidance on which finish fits your surface and budget.
Get My Free Estimate or call (586) 284-3810 — Mon–Sat, 8am–10pm